Products >> High Flow Filter Cartridge >> Absolute High Flow Filter Cartridge
LPHF-40-20-V Equivalent
- Product No.:FCTFUAPP4020HV
Equivalent, replacement, alternative, analog, retrofit, analogue: Eaton LOFPLEAT HF high flow filter cartridge LPHF-40-20-V (LPHF4020V)
General Information
FCTFUAPP4020HV is manufactured as the direct equivalent, replacement, alternative, analog, retrofit and analogue to replace Eaton LOFPLEAT HF high flow filter cartridge LPHF-40-20-V (LPHF4020V).FCTFUAPP4020HV polypropylene pleated high flow filter cartridge is specifically developed to provide higher flow solution for particulate removal in clarification and prefiltration of process, representing a highly-optimized pleated filter technology.
Features
- Absolute micron retention ratings from 0.45 to 100 microns
- Ergonomically designed handle.
- High surface area, high flow rates with low pressure drops
- Various configuration in lengths and adaptors
Benefits
- Reduce capital expenditure by fewer cartridges and housings used.
- Reduce operational expenditure by reduced cartridge change-out frequency, downtime, product waste, labour and disposal costs with longer service life.
- Ideal choice for a wide variety of process applications.
- Highly durable polypropylene construction, broad chemical compatibility, suitable for rigorous process conditions.
- Faster, easier filter change-out.
- Direct and economical filter element replacement.
Applications
- Food & Beverage
- Process water
- Cooling water for power generation
- Seawater RO pre-filtration
- Pulp & paper and textiles
- Petrochemical and chemicals
- Industrial condensate water
- Municipal water, etc.
Specifications
Effective Filtration Area (EFA): 3.4 m2 (36.6 ft2) per 20" (508 mm)
Materials of Construction
Support/Drainage material: polypropylene
Hardware: polypropylene
End cap: Glass fiber reinforced polypropylene
Sealing: Thermal bond
Regulatory compliance
Operating Conditions
Removal rating (μm) |
Element pressure drop (mbar/m3/h) |
Element pressure drop (psi/gpm) |
||||
0.45 |
7.86 |
3.8 |
2.56 |
0.0258 |
0.0125 |
0.0084 |
0.8 |
6.39 |
3.09 |
2.08 |
0.021 |
0.0102 |
0.0068 |
1 |
6.08 |
2.94 |
1.98 |
0.02 |
0.0097 |
0.0065 |
2 |
3.31 |
1.64 |
1.1 |
0.0109 |
0.0054 |
0.0036 |
3 |
2.61 |
1.29 |
0.87 |
0.0088 |
0.0043 |
0.0029 |
4.5 |
1.48 |
0.73 |
0.49 |
0.0049 |
0.0024 |
0.0016 |
10 |
1.04 |
0.52 |
0.35 |
0.0034 |
0.0017 |
0.0011 |
20 |
0.74 |
0.36 |
0.24 |
0.0024 |
0.0012 |
0.0008 |
30 |
0.64 |
0.31 |
0.21 |
0.0022 |
0.0011 |
0.0007 |
40 |
0.55 |
0.27 |
0.18 |
0.0018 |
0.0009 |
0.0006 |
50 |
0.46 |
0.22 |
0.15 |
0.0015 |
0.0007 |
0.0005 |
70 |
0.12 |
0.06 |
0.04 |
0.0004 |
0.0002 |
0.00013 |
90 |
0.114 |
0.057 |
0.038 |
0.00038 |
0.00019 |
0.00012 |
100 |
0.112 |
0.056 |
0.037 |
0.00037 |
0.00019 |
0.00012 |
Unit conversion: 1 mbar = 0.0145 psi
Ordering Guide
Cartridge |
Material |
Nominal Length |
Removal Rating |
Adaptor* |
O-ring Material |
|||||||
FCTFUA |
PP |
=Polypropylene |
20 |
=20" |
04 |
=0.45 μm |
20 |
=20 μm |
F |
=226 O-rings adaptor, handle end |
E |
=EPDM |
GF |
= Glass fiber |
40 |
=40" |
08 |
=0.8 μm |
30 |
=30 μm |
N |
=Nitrile |
|||
|
|
60 |
=60" |
1 |
=1 μm |
40 |
=40 μm |
S |
=Silicone |
|||
|
|
2 |
=2 μm |
50 |
=50 μm |
H |
=435 O-ring with handle, flat end |
V |
=Fluorocarbon elastomer |
|||
3 |
=3 μm |
70 |
=70 μm |
|
||||||||
4.5 |
=4.5 μm |
90 |
=90 μm |
|
||||||||
10 |
=10 μm |
100 |
=100 μm |
|
|
|
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China